No. 1: Red and white flashing
Status: The mechanism of the machine is partially blocked. The
can occur, for example, when the member steps on the machine
before the calibration is complete, if the user blocks the mechanism, or if clothing
mechanism or if clothing or other objects are caught in the mechanical parts.
the mechanical parts are jammed.
=> Stay away from the machine during calibration.
=> Remove obvious obstructions, for example loose
weights or clothing.
No. 2: Red (continuous, 30 seconds)
Status: Login has failed / blockage cannot be solved.
Action: If logging on again and/or restarting the machine does not
does not solve the problem, or if the red signal occurs more often
occurs, please contact EGYM support.
See also the manual under https://egym.com/int